Maintenance Tips

Setting Truck Tyre Pressure by Axle Weight

November 2026 adcreators

Correct tyre pressure is essential for truck safety, fuel efficiency and tyre life. Running the same pressure across every axle can lead to underinflated or overinflated tyres, increasing wear and operating costs.

For truck operators, maintaining the correct tyre pressure is an important part of everyday vehicle maintenance. Tyres are designed to carry specific loads at particular inflation pressures, meaning the right setting can vary depending on the weight distributed across each axle.

A truck carrying a heavy load may require different tyre pressures to a vehicle travelling empty or with a lighter load. Understanding how axle weights influence tyre pressure can help operators get the best performance from their tyres while supporting safer and more efficient fleet operations.

Why Tyre Pressure Matters

Underinflated tyres increase rolling resistance, which can reduce fuel efficiency and cause excessive heat build-up. Overinflated tyres can contribute to uneven tread wear, reduced grip and a harsher ride.

Setting pressure correctly for each axle helps your tyres perform as intended.

When a tyre is underinflated, more of its sidewall flexes as it rotates. This creates additional heat and places greater stress on the tyre structure. Over time, excessive heat can increase the risk of premature tyre failure, particularly when the vehicle is carrying heavy loads or travelling long distances.

Overinflation can also create problems. It may cause the tyre to make less consistent contact with the road surface, contributing to uneven tread wear and potentially affecting traction and handling.

Correct inflation helps distribute the vehicle’s weight across the tyre as intended. It can also support more consistent wear, reduce unnecessary rolling resistance and help extend the working life of the tyre.

How Axle Weight Affects Tyre Pressure

Not every axle on a truck carries the same amount of weight. The steer axle, drive axles and trailer axles can all have different loading requirements depending on the vehicle configuration and how its load is distributed.

This is why applying one pressure setting across every tyre may not be appropriate.

The steer axle carries the weight at the front of the vehicle, including the engine and cab. Drive axles support the vehicle’s rear load and provide traction, while trailer axles carry the weight of the trailer and its cargo.

The correct inflation pressure should be determined by the actual load carried by each tyre, taking into account whether the tyres are fitted as singles or duals.

For example, a heavily loaded drive axle may require a different pressure setting from a lightly loaded steer axle. Using the manufacturer’s load and inflation tables helps operators identify the appropriate pressure for each configuration.

How to Set the Right Pressure

Tyre pressure should be based on the load carried by each axle and the tyre manufacturer’s load and inflation recommendations.

To get started:

  • Weigh the truck by axle group under typical operating conditions.
  • Calculate the load carried by each tyre.
  • Refer to the manufacturer’s load and inflation tables to determine the appropriate pressure.
  • Check and adjust pressures when tyres are cold, and keep the recommended settings accessible to drivers and workshop staff.

Accurate axle weights are an important starting point. Weighing the vehicle under realistic operating conditions provides a clearer understanding of how much weight each axle carries during normal use.

It is also important to account for the tyre configuration. A single tyre and a dual tyre arrangement have different load capacities, so the correct pressure should always be selected using the relevant manufacturer’s data.

If a truck regularly operates with different loads, operators should consider how those changes affect axle weights and tyre pressure requirements. The recommended settings should be reviewed whenever vehicle configurations, tyre specifications or operating conditions change.

Checking Tyre Pressure

Tyre pressure naturally increases as tyres warm up, so never release air from a hot tyre to match its recommended cold pressure.

Use a reliable pressure gauge to check tyres regularly. Differences between tyres on the same axle may indicate a leak, uneven loading or a mechanical issue that needs inspection.

Pressure checks should form part of the regular vehicle inspection routine. Drivers and workshop staff should know the recommended cold inflation pressures for each axle and understand how to identify signs of pressure loss.

A reliable pressure gauge is important because inaccurate readings can lead to incorrect adjustments. Valve stems, valve caps and surrounding components should also be inspected for damage or leaks.

If a tyre is found to be significantly underinflated, it should be assessed before returning to service. Simply adding air may not be enough, as operating underinflated can cause internal damage that is not always visible from the outside.

Don't Overlook Inner Dual Tyres

Inner dual tyres can be difficult to access and are easily missed during routine checks. If one loses pressure, the remaining tyre may carry more of the load, increasing heat and the risk of failure.

Make sure every tyre, including inner duals, is checked with a pressure gauge. Accessible valves and well-maintained valve components make regular inspections easier.

Dual tyres need particular attention because both tyres are intended to share the load. If one tyre is underinflated, the other may experience additional stress as it supports more of the weight.

Differences in tyre pressure, diameter or tread depth can also affect how evenly the load is distributed. Regularly checking both tyres helps identify issues before they contribute to excessive wear or damage.

Fleet operators should make sure inspection procedures account for inner duals, rather than focusing only on tyres that are easy to reach or see.

Building a Reliable Tyre Maintenance Routine

A consistent tyre maintenance routine should include:

  • Cold pressure settings based on axle weights and manufacturer recommendations.
  • Regular pressure checks using an accurate gauge.
  • Inspection of valves, valve caps and signs of damage or leaks.
  • Proper inspection of tyres that have been significantly underinflated before they return to service.
  • Tyre pressure monitoring systems (TPMS) where appropriate, particularly for trailers and larger fleets.

Consistency is important when maintaining tyres across a fleet. Clear inspection procedures help ensure that every vehicle receives the same level of attention, regardless of which driver or workshop staff member completes the checks.

Keeping a record of tyre pressures, inspections and any adjustments can also help identify recurring problems. For example, repeated pressure loss on the same axle may indicate a leak, damaged valve or another mechanical issue that needs further investigation.

Tyre pressure monitoring systems (TPMS) can provide additional visibility by alerting operators to changes in inflation pressure while vehicles are in operation. These systems can be particularly useful for larger fleets and trailers, where monitoring every tyre manually can be more challenging. However, TPMS should complement regular inspections rather than replace

Frequently Asked Questions

How often should truck tyre pressure be checked?

Tyre pressure should be checked regularly as part of your vehicle inspection and maintenance routine. Follow the tyre manufacturer’s recommendations and your fleet’s inspection procedures.

Should truck tyre pressure be checked when hot or cold?

Where possible, check tyre pressure when the tyres are cold. Pressure naturally increases as tyres warm up, so never release air from a hot tyre to match the recommended cold pressure.

Can a tyre pressure monitoring system replace manual checks?

A tyre pressure monitoring system (TPMS) can help identify pressure changes, but it should complement regular physical inspections rather than replace them.

Should every axle have the same tyre pressure?

Not necessarily. Different axles can carry different loads, and the correct pressure depends on the load per tyre, tyre configuration and manufacturer’s recommendations. Always refer to the appropriate load and inflation tables.

What happens if a truck tyre is consistently underinflated?

Consistently low pressure can increase rolling resistance, heat build-up and uneven wear. It can also increase the risk of tyre damage or failure, particularly under heavy loads.

Keep Your Fleet Running Efficiently with Royale Truck Services

Correct tyre pressure helps reduce avoidable wear, improve fuel efficiency and support safer fleet operations.

Royale Truck Services provides mobile truck tyre services across NSW and VIC to help keep your fleet moving.

Whether you need assistance with tyre inspections, pressure concerns or replacement tyres, maintaining the correct specifications is an important part of keeping your vehicles operating efficiently.

Taking a proactive approach to tyre maintenance can help identify issues early, reduce unexpected downtime and support the long-term performance of your fleet.

Call 1300 500 002 to speak with the Royale Truck Services team or Find your nearest location here.